Fawteen, Grinder Specs

Stories, News and General Yakking
Post Reply
GeneSC
Posts: 67
Joined: Thu Jul 18, 2019 6:50 pm

Fawteen, Grinder Specs

Post by GeneSC » Sat Apr 25, 2020 7:02 pm

Do you happen to have a spec sheet on the grinder you made for me? and could I have a copy? Friend of mine works in a machine shop and was VERY impressed with it, and would like to try his hand at building one. A copy of dimensions would also be a big help, I know it's your design and you may not want to give it out and I understand completely. Thanks-------
Gene

PHPaul
Site Admin
Posts: 366
Joined: Fri Jul 12, 2019 6:43 am
Location: Downeast Maine

Re: Fawteen, Grinder Specs

Post by PHPaul » Sat Apr 25, 2020 8:15 pm

Actually, I swiped the design off the internet. I'll see if I can find a link to it and post it here for you.

Don't remember exactly, but it's likely I made a couple of changes. I usually do, mostly to simplify things.

PHPaul
Site Admin
Posts: 366
Joined: Fri Jul 12, 2019 6:43 am
Location: Downeast Maine

Re: Fawteen, Grinder Specs

Post by PHPaul » Sat Apr 25, 2020 8:21 pm

https://www.instructables.com/id/2X72-Belt-Grinder/

This isn't the exact page, but it's the same design. If I can find the original I worked from I'll post it.

GeneSC
Posts: 67
Joined: Thu Jul 18, 2019 6:50 pm

Re: Fawteen, Grinder Specs

Post by GeneSC » Sun Apr 26, 2020 9:29 am

PHPaul wrote:
Sat Apr 25, 2020 8:21 pm
https://www.instructables.com/id/2X72-Belt-Grinder/

This isn't the exact page, but it's the same design. If I can find the original I worked from I'll post it.
Thanks so much Paul.

Post Reply